PicoProbe PCB kit

Description Show Reviews Turn your Raspberry Pi Pico into a debug probe Raspberry Pi Pico is NOT included This PCB is designed to turn a Pico into a nice debug probe using the PicoProbe software. The kit provides everything you need to turn a Raspberry Pi Pico into a debug probe: The Picoprobe-PCB 1x cortex-M SWD 10pin header 1x cortex-M SWD 10pin ribon cable 1x 6 pin male header 1x 6 pin female header Mounting options There are two ways to mount a Raspberry Pi Pico on the Picoprobe-PCB. You can either solder it directly for a slim/compact result (right), or use header to be able to re-use the Pico on other projects (left). Install the Picoprobe software Either get the picoprobe .uf2 binary from the release here or compile it yourself from sources here . Hold the BOOTSEL button on the Pico, then connect to your computer using a micro USB cable. Drag and drop the UF2 file on to the RPI-RP2 drive. You should be good to go. Plug the picoprobe SWD pin to the Pico that you want to debug Build Raspberry Pi’s openocd $ sudo apt install automake autoconf build-essential texinfo libtool libftdi-dev libusb-1.0-0-dev $ git clone https://github.com/raspberrypi/openocd.git –branch picoprobe –depth=1 –no-single-branch $ cd openocd $ ./bootstrap $ ./configure –enable-picoprobe $ make -j4 Run openocd $ ./src/openocd -s tcl -f interface/picoprobe.cfg -f target/rp2040.cfg Debug! Now that openocd is connected, you can start debugging with GDB for instance. $ arm-eabi-none-gdb (gdb) target extended-remote :3333 Resources Source Code Design Files 0 Reviews Hide Reviews Show Reviews