128×64, 1.3inch OLED display HAT for Raspberry Pi

Description Show Reviews Waveshare13890 -1.3inch OLED Display HAT For Raspberry Pi, 128×64 Pixels, SPI/I2C Interface This is an OLED display HAT for Raspberry Pi, 1.3inch diagonal, 128×64 pixels, with embedded controller, communicating via SPI or I2C interface. Trying to add a control interface for your Pi? This compact display would be the ideal choice. Features Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Optional interfaces: 4-wire SPI, 3-wire SPI, I2C, configured via onboard resistor 1x joystick (5-position), 3x pushbuttons, handy and useful Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano) Specifications Driver: SH1106 Interface: 4-wire SPI, 3-wire SPI, I2C Display color: blue Resolution: 128×64 Operating voltage: 3.3V Interface SYMBOL RASPBERRY PI PIN (BCM) DESCRIPTION KEY1 P21 Button 1/GPIO KEY2 P20 Button 2/GPIO KEY3 P16 Button 3/GPIO Joystick Up P6 Joystick Up Joystick Down P19 Joystick Down Joystick Left P5 Joystick Left Joystick Right P26 Joystick Right Joystick Press P13 Joystick Press SCLK P11/SCLK SPI clock input MOSI P10/MOSI SPI data input DC P24 Data/Command selection (high for data, low for command) CS P8/CE0 Chip selection, low active RST P25 Reset, low active Dimensions Development Resources Wiki : www.waveshare.com/wiki/1.3inch_OLED_HAT 0 Reviews Hide Reviews Show Reviews