PiKVM V3 Pre-Assembled – ASIA

Description Videos Show Reviews PiKVM V3 Pre-Assembled Edition After a successful Kickstarter campaign for the PiKVM HAT, were excited to offer a complete and ready-to-use PiKVM Pre-Assembled solution! Based on a Raspberry Pi 4, the PIKVM Pre-Assembled Edition is a cost-effective solution to manage servers or workstations remotely, regardless of the health of the operating system or whether one is installed. You can fix any problem, configure most BIOS, or even reinstall the OS using the virtual CD-ROM or Flash Drive. Features Control a computer/device using a web browser! Low bandwidth usage – 6Mbps for Full-HD approximatively Full HD 1920 x 1080p 50Hz max resolution HDMI capture devicewith future audio support Mass storage emulation – Simulate a virtual flash drive or CD drive using an image file uploaded to PiKVM! Ability to initiate removal and insertion of USB devices ATX controller – Switch the machine on or off, reset it, andmonitor power & storage LED activity remotely Automatic variable-speed 5V PWM fan for silent operation USB & RJ-45 (Cisco-like) serial console for configuration and debugging OLED display with name, IP address, temperature, CPU load, and uptime Software: Linux-based, regularly updated by a dedicated team Technical specifications Includes a Raspberry Pi 4 with 2GB RAM Video/Resolution: 1920x1080p at 50Hz or lower Power: USB-C 5.1V, 3A power supply required (not included) Real-time clock with rechargeable Super Capacitor Enclosure: robust 1.6mm (1/16″) steel case Product dimensions: 92mm x 75mm x 45mm (4″x3″x2″) Product weight: 410 g (14.5 oz.) Warranty: 1 year limited Connectors Front: Back: Side: Power: USB-C ATX Control Video Out: micro HDMI Serial Console: USB-C + RJ45 (one active at a time) OTG Host USB (USB-C) 2x USB 2.0, 2x USB 3.0 HDMI Video input & output Gigabit Ethernet What’s in the Box PiKVM v3.3 Pre-Assembled ATX adapter board with brackets and motherboard interface wiring A 32 GB MicroSD card pre-imaged with the PiKVM software Essential accessories 5.1v 3A power supply with USB-C , Raspberry Pi compatible A regular HDMI cable USB-C to USB-A cable with DATA lines (for keyboard and mouse emulation) Straight Ethernet cable (NOT crossover, to connect the PiKVM and ATX board) Resources PiKVM Website PiKVM on GitHub Videos Hide Videos Show Videos Pi-KVM – DIY CHEAP Raspberry Pi KVM over IP Prototype Version 3 Review! Checking out the DIY KVM over IP Prototype Version 3 from Pi-K… 0 Reviews Hide Reviews Show Reviews