Pixy CMUcam5 Image Sensor – LEGO

Gives your LEGO Mindstorms creation the ability to see objectsConnects directly to LEGO Mindstorms EV3 and NXT controller bricks with supplied cableImage sensor: Omnivision OV9715, 1/4″, 1280x800Lens field-of-view: 75 degrees horizontal, 47 degrees verticalIncluded software “blocks” are fully compatible with Mindstorms programming environment and can be easily dragged and dropped into your Mindstorms programsLego not includedThePixy CMUcam5 Image Sensor – LEGO Versionis a fast vision sensor you can quickly “teach” to find objects, and it connects directly to Arduino and other controllers. Its great for robotics or any other application that requires computer vision. Pixy pairs a powerful dedicated processor with the image sensor. Pixy processes images from the image sensor and only sends the useful information (e.g. purple dinosaur detected at x=54, y=103) to your microcontroller. And it does this at frame rate (50 Hz). The information is available through one of several interfaces: UART serial, SPI, I2C, USB, or digital/analog output. So your Arduino or other microcontroller can talk easily with Pixy and still have plenty of CPU available for other tasks.50 frames per secondPixy processes an entire 640×400 image frame every 1/50th of a second (20 milliseconds). This means that you get a complete update of all detected objects’ positions every 20ms. At this rate, tracking the path of falling/bouncing ball is possible. (A ball traveling at 30 mph moves less than a foot in 20ms).Color-based filteringPixy uses a color-based filtering algorithm to detect objects. Most of us are familiar with RGB (red, green, and blue) to represent colors. Pixy calculates the color (hue) and saturation of each RGB pixel from the image sensor and uses these as the primary filtering parameters. Pixy remembers up to 7 different color signatures, which means that if you have 7 different objects with unique colors, Pixys color filtering algorithm will have no problem identifying them. If you need more than seven, you can use color codes.Teach it the objects you’re interested inPixy is unique because you can physically teach it what you are interested in sensing. Pixy can learn seven color signatures, numbered 1-7. Color signature 1 is the default signature. To teach Pixy the other signatures (2-7) requires a simple button pressing sequence.PixyMon lets you see what Pixy seesPixyMon is an application that runs on Windows, MacOs and Linux. It allows you to see what Pixy sees, either as raw or processed video. It also allows you to configure your Pixy, set the output port and manage color signatures. PixyMon communicates with Pixy over a standard mini USB cable. PixyMon is great for debugging your application.Controller supportPixy can easily connect to lots of different controllers because it supports several interface options (UART serial, SPI, I2C, USB, or digital/analog output), but Pixy began its life talking to Arduinos. Over the last several months support for Arduino Due, Raspberry Pi and BeagleBone Black have been added.SpecificationsLens type: Standard M12Power consumption: 140 mA typicalPower input: USB input (5V) or unregulated input (6V to 10V)RAM: 264K bytesFlash: 1M bytesDocumentationDocumentation(41MB .zip file)DimensionSize: 2.1″ x 2.0″ x 1.4″Weight: 27g