Raspberry Pi 5

The next iteration of the Raspberry Pi single board computer featuring a 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, Raspberry Pi 5 delivers a 23 increase in CPU performance relative to Raspberry Pi 4. Alongside a substantial uplift in graphics performance from an 800MHz VideoCore VII GPU; dual 4Kp60 display output over HDMI; and state-of-the-art camera support from a rearchitected Raspberry Pi Image Signal Processor, it provides a smooth desktop experience for consumers, and opens the door to new applications for industrial customers.For the first time, this is a full-size Raspberry Pi computer using silicon built in-house at Raspberry Pi. The RP1 southbridge provides the bulk of the I/O capabilities for Raspberry Pi 5, and delivers a step change in peripheral performance and functionality. Aggregate USB bandwidth is more than doubled, yielding faster transfer speeds to external UAS drives and other high-speed peripherals; the dedicated two-lane 1Gbps MIPI camera and display interfaces present on earlier models have been replaced by a pair of four-lane 1.5Gbps MIPI transceivers, tripling total bandwidth, and supporting any combination of up to two cameras or displays; peak SD card performance is doubled, through support for the SDR104 high-speed mode; and for the first time the platform exposes a single-lane PCI Express 2.0 interface, providing support for high-bandwidth peripherals.SpecificationsProcessor:2.4GHz quad-core 64-bit Arm Cortex-A76 CPUcryptography extensions512KB per-core L2 caches2MB shared L3 cacheFeatures:VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2Dual 4Kp60 HDMI display output with HDR support4Kp60 HEVC decoderLPDDR4X-4267 SDRAMDual-band 802.11ac Wi-FiBluetooth 5.0 / Bluetooth Low Energy (BLE)microSD card slot, with support for high-speed SDR104 mode2 USB 3.0 ports, supporting simultaneous 5Gbps operation2 USB 2.0 portsGigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)2 4-lane MIPI camera/display transceiversPCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)5V/5A DC power via USB-C, with Power Delivery supportRaspberry Pi standard 40-pin headerReal-time clock (RTC), powered from external batteryPower buttonDocumentsProduct BriefFAQMechanical DrawingRP1 PeripheralsNote: We recommend to use a heatsink and a fan or at least keep it in a well ventilated area. It can get very hot(~70C without a heatsink)