T-Camera-S3 with CASE

The T-Camera S3 is an evolution of the TTGO T-Camera ESP32 board introduced in 2019 with many of the same features, but the ESP32 microcontroller has been replaced with an ESP32-S3 microcontroller with vector extensions that makes it suitable for machine learning and computer vision applications. This makes it a powerful tool for AI applicationSpecificationsESP32-S3-WROOM-1wireless moduleSoC ESP32-S3FN16R8dual-core Tensilica LX7 microcontroller @ 240 MHz (Note: this SKU is not listed in the official ESP32-S3 datasheet) with2.4 GHz 802.11n WiFI 4 and Bluetooth5.0LE connectivityMemory 8MB PSRAMStorage 16MBSPI flashCamera 5MP OV5640 H626 normal lensDisplay 0.96 12864 OLED display connected via SSD1306 I2C display controllerAudio MicrophoneUSB 1x USBType-Cport for power and programmingSensorsAS312 PIR motion sensorExpansion5-pin connector withIO16, IO15, 5V,3.3V, and GND5-pin header with 3x GPIO, 3.3V, and GND6-pin header with UART (Tx, Rx), and 4x GPIO.Misc Reset button (under the camera) ,Power and bootbuttonsPower Supply5V viaUSB Type-CportSupport for LiPo battery via 2-pin header andAXP210charging chipDimensionsBoard only: 69 x 28 x 18.5 mm (including PIR dome)Shell only: 75 x 35 x 12 mmPackage include:T-Camera-S32mm 5 pin to jumper wire(20cm)JST 2,0mm 20 cable2.54 male pin header(5pin)2.54 male pin header(6pin)Plastic CASE with boltsDocumentationGitHub Repository:https://github.com/Xinyuan-LilyGO/LilyGo-Cam-ESP32S3On Arduino IDE select: ESP32S3 Dev Module