FeatherWing OLED – 128×32 OLED Add-on For All Feather Boards

A Feather board without ambition is a Feather board without FeatherWings! This is theFeatherWing OLED: it adds a 128×32 monochrome OLED plus 3 user buttons toanyFeather main board.These displays are small, only about 1″ diagonal, but very readable due to the high contrast of an OLEDdisplay. This screen is made of 128×32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.Tested and works with our Feather 32u4, M0 and ESP8266 boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus. To use,simply follow our tutorial to install our Arduino library, its basically aFeather-shaped version of the 128×32 I2C OLED breakoutTECHNICAL DETAILSPCB dimensions: 22.9mm x 50.9mm / 0.9″ x 2″Display area: ~25.8mm / ~1.0″Weight: 4.8gOn 32u4 or M0 Feathers, buttons A, B & C connect to 9, 6, 5 respectivelyOn Huzzah ESP8266 Feather, buttons A, B & C connect to 0, 16, 2 respectivelyDocumentsOLED UG-2832HSWEG02 Datasheet