3.52inch e-Paper HAT, 360 240, SPI Interface

Description Show Reviews Waveshare 22698 – 3.52inch E-Paper HAT, 360 240, SPI Interface – 3.52inch e-Paper HAT Size: 3.52 Resolution:360240 Viewing Angle:>170 Display Color:Black/White Grey Scale:2 Communication:SPI Display Panel:E-paper Experience:Paper-like Environment:Ambient Light Required Display Type:Passively Reflective Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32) Specifications operating voltage 3.3V/5V display color Black/White interface 3-wire SPI, 4-wire SPI grey scale 2 outline dimensions 86.5 57mm full refresh time 1.5s display size 74.51 49.67mm refresh power <25mW (typ.) DOT PITCH 0.207 0.207mm standby current <0.01uA (almost none) RESOLUTION 360240 pixels viewing angle >170 Advantages Of EINK E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 viewing angle. It is usually used as e-reader due to its paper-like effect. Onboard SPI Control Interface VCC Power (3.3V / 5V input) GND Ground DIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output pin Includes 3.52inch e-Paper HAT x1 PH2.0 20cm 8Pin x1 Weight: 0.058 kg Outline Dimensions Resources WIKI: www.waveshare.com/wiki/3.52inch_e-Paper_HAT * Resources for different product may vary, please check the wiki page to confirm the actually provided resources. 0 Reviews Hide Reviews Show Reviews