AMS 2 Pro

AMS, short for Automated Material System, collaborates with 3D printers to accomplish automated multi-color printing. AMS lite is one variant of the Automated Material Systems developed by Bambu Lab24-Colors/Multi-material: Serially connect up to 4 AMS 2 Pro & 8 AMS HT units, total of 24 filamentsElectro-Magnetic Air Vent: Fast filament drying & air-tight filament storage65C Drying: Up to 65C drying temperatureBrushless Motor: 60% faster feeding speedElectro-Magnetic Air VentAutomated venting facilitates dehumidification during drying and ensures airtight sealing for weeks of high-quality printing.Auto-rotate DryingDuring the drying process, the filament spools rotate automatically to ensure more even drying.RFID SyncAMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed.Speed Up! Faster Multi-material Printing!Tool-Free Filament Tubes AccessRemoving snapped filament from the first-gen AMS requires extracting all spools and disassembling the shell with two screws, taking 3-5 minutes. In contrast, the AMS 2 Pro offers direct, tool-free access to filament tubes from the top.Ceramic InletCeramic filament inlets with Vickers hardness of 1200 significantly enhance durability.AMS 2 Pro SpecsItemSpecificationBodyDimensions372*280*226 mmNet Weight2.5 kgHousing MaterialABS/PCPrintingFilament SupportedPLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF/PAHT-CF/PETG-CF/Support for PLA/PETG, and TPU for AMSFilament Not SupportedTPE, generic TPU, PVA (damp), BVOH (damp),Bambu PET-CF/TPU 95A, and other filament that contains carbon fiber or glass fiberFilament Diameter1.75 mmSpool DimensionWidth: 50 mm-68 mmDiameter: 197 mm-202 mmRFID IdentificationSupportedDryingHighest Temperature* 65 CFilament SupportedPLA, PETG, Support for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH *, PP, POM*, HIPS*, Bambu PLA-CF*/ PAHT-CF*/ PETG-CF*, and TPU for AMS*Active Moisture DischargeSupportedSealed StorageSupportedTemperature & Humidity DetectionSupported. Real-time temperature and humidity can be displayed on the screen, Bambu Studio, and Bambu Handy.PowerInput24 V 4 A* Filaments marked with * require higher drying temperature. The AMS 2 Pro cannot dry them completely. If you want better drying performance for these filaments, we recommend purchasing an AMS HT.*The maximum temperature of the drying function can only be achieved when the ambient temperature is above 25 C. When the ambient temperature is below 25 C, due to natural heat dissipation, the actual drying temperature may not reach the maximum value.Documents:Datasheet