Audiotec Fischer AMI Tuning kit

Visapusika sprendimas automobili signalo ir akustinio matavimo
AMI Tuning rinkinys yra visikai aprpinta matavimo sistema, kuri sujungia profesionalios klass AMI ssaj su pasirinkimu aukiausios kokybs pried, silani visk, kas reikalinga tiksliam signalo ir akustins analizs atlikimui moderniose DSP pagrindu veikianiose garso sistemose. Sukurtas kaip isamus, paruotas naudoti paketas, tai puikus sprendimas tiems, kurie reikalauja maksimalaus tikslumo, sklandaus integravimo ir lanksios mobiliosios naudojimo. Jos irdyje: AMI sukurta dirbti tobulai harmonijoje su Audiotec Fischer DSP PC-Tool programine ranga, ir papildyta protingais priedais realaus pasaulio matavimo scenarijams.

Auktos tikslumo akustiniai ir signalo matavimai bet kur jums reikia
AMI tarnauja kaip centrinis matavimo centras, teikiantis visus reikalingus ryius vairiems elektriniams ir akustiniams analizs uduotims. Rinkinys apima garsj Beyerdynamic MM-1 tiksliai kalibruot kondensatori matavimo mikrofon…

Techniniai duomenys

Inputs:
1 x Microphone input
1 x Line input

Microphone input specification

Frequency response:
12 Hz – 44 kHz (+/-1 dB)

Dynamic range:
95 dB (A-weighted)

Input sensitivity:
5 – 200 mV

Phantom power:
Yes (24 Volts)

Line input specification

Frequency response:
8 Hz – 44 kHz (+/-1 dB)

Dynamic range:
101 dB (A-weighted)

Input sensitivity:
max. 1 V / max. 40 V

Input impedance:
10 kOhms

Outputs:
2 x Line output
1 x Optical output (SPDIF)

Line output specification

Frequency response:
7 Hz – 44 kHz (+/-1 dB)

Dynamic range:
100 dB (A-weighted)

Maximum output voltage:
900 mV (RMS)

Minimum load:
5 kOhms

Loopback function:
Yes

General specification

Audio sampling rate:
96 kHz / 32 Bit

USB power consumption:
max. 250 mA

Supported operating systems:
Windows, macOS, iOS and Android

Microphone

Transducer principle:
Condenser (back-electret)

Operating principle:
Pressure receiver

Frequency response:
20 20,000 Hz (50 16,000 Hz 1.5 dB), diffuse-field equalized

Polar pattern:
Omnidirectional

Sensitivity (0 dB = 1 V/Pa)
15 mV/Pa (= -36.5 dBV) 1 dB

Nominal impedance:
160

Nominal load impedance:
2.2 k

Maximum SPL (Sound Pressure Level)
122 dBSPL at f = 1 kHz, k = 1%, RL = 2.2 k

Signal-to-noise ratio (related to 1 Pa)
57 dB

A-weighted equivalent noise level:
Approx. 26 dB(A)

Power supply:
12 48 V phantom power

Current consumption:
Approx. 1.9 mA

Output:
Electronically balanced

Compatibility:
DSP PC-Tool 6
DSP PC-Tool 5
DSP PC-Tool 4

Scope of delivery:
1 x AMI (Audio Measurement Interface)
1 x Beyerdynamic MM1 Microphone
1 x Microphone holder for tripod
1 x RCA-to-Highlevel adaptor
1 x 16 GB USB 3.0 flash drive with DSP tuning tracks
1 x 3.0 m / 9.85 USB-C to USB-C cable with USB-A adaptor
1 x 3.5 m / 11.50 optical toslink cable
1 x 3.5 m / 11.50 mono RCA cable
1 x 2.0 m / 6.56 XLR microphone cable