Clearaudio Basic V2, phono korektorius

Clearaudio Basic V2 – yra auktos kokybs phono korektorius su minimalistiniu dizainu ir paangiomis technologijomis. Jis palaiko tiek MM, tiek MC galvutes ir suteikia galimyb tiksliai reguliuoti garso parametrus. Galima jungti subsonin filtr, kuris efektyviai slopina nepageidaujamus em dani rezonansus, daniausiai sukeliamus patefono vibracij.

Svoris: apie 1,2 kg
Matmenys: 118 145 (158 su RCA) 42mm
Mediaga ir spalva: sidabro ir juodos spalvos

APRAYMAS

Its predecessor, the basic plus, was a multiaward winner and with the V2 weve taken all of that coveted Plus technology up a notch.

Theres nothing basic about the basic V2 phono stage. Dont be fooled by its cool, minimalist design. Within that sleek aluminum casing (with silver or black anodized finish) lies an inner world of highly refined features. Its predecessor, the basic plus, was a multiaward winner and with the V2 weve taken all of that coveted Plus technology up a notch.

On the outside, weve kept it very simple. Theres just one visible control, a single power switch on the upper surface that opens up a raft of possibilities. On the underside you can switch between moving coil and moving magnet mode. From there, you can easily enjoy the basic V2 with almost any high-end phono cartridge without making any further adjustments.

Or, you can choose from a range of performance enhancing settings to fine-tune its parameters to your system and your hearts content. An optional subsonic filter attenuates any unwanted low frequency noise, while RIAA equalization accuracy is within 0.1 dB.

All of which adds up to the basic V2 being the perfect all-rounder for both audiophiles and music lovers.

TECHNINIAI DUOMENYS

Mode: MM / MC switchable (at bottom)
Subsonic filter switchable (at bottom)
20Hz (18dB / Oct.; on each channel)
Amplification: + 46dB (MM mode)
+ 66dB (MC mode)
Input load: 47k / 270pF (MM mode)
500 / 270pF (MC mode)
RIAA accuracy: 0.1dB
THD: < 0.002% (IEC A)
Signal to noise ratio: – 72dB (MM mode)
– 67dB (MC mode)
Headroom: + 20dB
Max. output voltage: > 10V (at 1kHz)
RIAA: 75s / 318s / 3180s, 2 passive filter

Channel seperation: > 90dB at 1kHz
Output impedance: 10
Inputs: unbalanced (RCA)
Outputs: unbalanced (RCA)
Power consumption: Max. consumption: 3 watts (in operation)
Standby mode: <0.3 watts
Power supply: 18V DC (external wall mount power supply; 1.4m cable length)
Total weight: Approx. 1.2kg (preamp and power supply)
Dimensions (W/D/H): Approx. 4.65 5.71 (6.22 with RCA) 1.65 inches
Dimensions (W/D/H): Approx. 118 145 (158 with RCA) 42mm

DOKUMENTAI

Vartotojo vadovas (EN)