Helix IK S10-DVC2 ( 2x2Ohm )

HELIX IK S10-DVC2
Flat dimensions deep bass
With the shallow HELIX IK S subwoofers, the realization of particularly flat and compact enclosure designs shouldnt be a problem anymore. Its extremely low installation depth opens up new installation possibilities that do not require making any acoustic compromises at all. Additionally, thanks to the use of large voice coils and its low resonant frequency, the HELIX IK S series delivers an absolutely stunning bass performance, which is in no way inferior to larger dimensioned woofers.

Smart down to the very last detail
The enormously stiff sandwich paper cone in conjunction with our heavy-duty drive system easily converts amplifier power into powerful sound pressure without any compression effects, while simultaneously demonstrating finesse when it comes to more subtle beats. A special highlight: the magnet system has a threaded hole on the back and thus allows the woofer to be fixed to the back panel of the enclosure. Since every millimeter of depth counts in flat constructions, enclosure vibrations are effectively reduced even with thin walls.

All inclusive for self-made enthusiasts
In addition to the high-quality connection terminal with gold-plated screw terminals, a solid protective grille and gasket are also included. For optimal bass performance in DIY installations you can find recommendations for sealed and vented enclosures with all parameters such as net volume, port tuning frequency or DSP settings in our technical data sheet.

Features
Chassis with particularly low installation depth optimized for compact and shallow enclosure constructions
2 x 2 Ohms dual voice coil
Magnet system with threaded hole on the back allows screwing to the back panel of the enclosure for stabilization and reduction of enclosure vibrations
Extremely stiff sandwich paper cone
Long-excursion rubber surround for highest mechanical rating
Rugged magnet cover with HELIX lettering for perfect magnet protection
Enclosure connection terminal, grille and gasket included in delivery

Techniniai duomenys

Power handling RMS / max.P300 / 600 Watts
Impedance Z2 x 2
DC resistance Re2.0
Resonance frequency Fs37 Hz
Mechanical Q factor Qms7.61
Electrical Q factor Qes0.54
Total Q factorQts0.51
ComplianceCms150 m/N
Equivalent air volumeVas26 L
Force factor B*I10.1 Tm
Sensitivity SPL93.0 dB @ 2.83V / 1m
87.0 dB @ 1W / 1m
Cone area Sd353 cm
Moving mass Mms119 g
Cone material Sandwich paper cone
Mechanical resistance Rms3.7 kg/s
Voice coil diameter50.8 mm
Voice coil winding height 18 mm
Max. linear excursion Xmax+/- 6.0 mm
Outer diameter262 mm / 10.31
Installation diameter229 mm / 9.01
Installation depth 84.5 mm / 3.33

Recommended enclosure volumes

Sealed box
Net volume 14 L
Lower limiting frequency (-3dB) 46 Hz
Recommended DSP settings Recommended self-define highpass filter with 45 Hz cut-off frequency and Q = 1.3
additional EQ filter 100 Hz / Q = 1.0 / -3 dB

Vented box
Net volume 16 L
Port diameter70 mm / 2.76
Port area 38 cm
Port length 38 cm / 14.96
Port tuning frequencyFb37 Hz
Lower limiting frequency (-3dB) 39 Hz
Recommended DSP settings Recommended self-define highpass filter with 37 Hz cut-off frequency and Q = 1.2
additional EQ filter 95 Hz / Q = 0.7 / -3 dB
Scope of delivery
1 x Subwoofer HELIX IK S10-SVC2
1x Grille
1 x Gasket
1x Enclosure connecting terminal
1 x Data sheet