PiZ-EzConnect Terminal Block HAT for Pi Zero

Description Show Reviews PiZ-EzConnect allows connection to any Raspberry Pi header pinsvia a terminal block. Likethe Pi-EzConnect board,PiZ-EzConnect conformsto the Pi Zerodimensions, making thisa nice, compact, easy touse and connect GPIOsto a Pi. PiZ-EzConnectexposes the 40-pin header available on a Raspberry Pi. All oddnumberedpins are accessible via terminal blocks Pins 2, 4 and 6 are exposed via aterminal block as those pins provide Power and Ground. Other evennumbered pins are left to the discretion of the user. A male header block is included for Pi Zero or Pi Zero W users. PiZ-EzConnect can be used wherever the Pi-EzConnect is used. The compact form factor makes it convenient for use with Pi Zero, Pi Zero W, Pi 2, Pi 3 or other Raspberry Pi clones conforming to the Pi-HAT standards. Theseinclude OrangePi, Asus Tinker Boards and other boards. Additional terminal blocks can be added to PiZ-EzConnect board. Theseterminal blocks are standard 3.5mm terminal blocks (3.5mm is the distancebetween the pins). These terminal blocks are readily available from anyelectronic component supply places. Using a PiZ-EzConnect board, it is possible to connect multiple sensors and other electronic devices / components to multiple GPIOs on a Raspberry Pi. With PiZ-EzConnect, you can leverage the full capability of a Raspberry Pi. Features ExposesRaspberry Pi Zeroheaders with easyto connectterminal-blocks. Solderless andsecure connectionsfor all GPIOs viaterminal blocks. Power andGround aremarked. 3.3V, 5Vpower terminalblocksare presoldered. Powerconnections 5V,3.3V and groundconnections. Fits Pi Zero, PiZero W, Pi 2, Pi 3or other Pi clones(e.g. Asus,OrangePi) with 40pin headers. Compactfootprint. Fullydocumented pins. Includes maleheaders for Pi Zeroand two additional2-port terminalblocks foradditionalconnections. Terminal blockscan be soldered onbottom layer aswell as top layer. Pi Models Supported By default, we ship the larger, 40 pin connectors which works with the Raspberry Pi+ (models A+, B+, Pi-2 and Pi-3, and other vendors adhering to the HAT standard). Pi-Zero is also supported, as long as a 40 pin header is soldered onto the Pi-Zero. The mounting holes for the standoff for Pi-zero are such that only two standoffs can be connected. Older models of the Raspberry Pi with a 26 pin header are not supported. Recommended Accessories Standoffs are not included, so we recommend a 12-15mm standoff of your choice . 0 Reviews Hide Reviews Show Reviews